Design and Application of a Rock Breaking Experimental Device With Rotary Percussion
Abstract
The rotary impact drilling technology is one of the effective speed-up methods in drilling deep well. The dynamics model of the impact process and rock breaking shows that the peak value of the impact load is affected by the spring compression, and the impact time increases with the piston’s mass increasing. The stress wave in rock is proportionate to the impact load. A new rock broken experiment device with rotary impact was designed, and the device can measure and adjust the WOB, rotary rate, impact load and frequency, also has the ability of rock breaking for conventional and rotary percussion drilling. The rock breaking experiments show that the rotary percussion drilling technology can improve the rate of penetration of PDC bit significantly; increasing the value of impact load can improve the ROP significantly. When different rotary percussion drilling tools used in different formations, optimizing the WOB and rotary rate for fast drilling is very necessary. The influence of the rotary impact drilling on the rock broken can be studied by the experiment device, which is helpful for the design and optimization of the percussion tools.
Keywords
Full Text:
PDFReferences
[1] Wang, R. J. (1988). Hydraulic rotary percussion drilling. Beijing, China: The Geological Publishing House.
[2] Tao, X. H. (2001). Effective measures for improving the penetration rate of deep well. Oil Drilling & Production Technology, 23(5), 4-8.
[3] Jian, Z. J., Zhang, W. H., & Liu, G. H. (2001). Current status and developing trend of research on hydraulic hole hammer for oil drilling. China Petroleum Machinery, 29(11), 43-46.
[4] Sun, M. X. (2010). Design and development of equipment for testing PDC drilling features. Oil Drilling & Production Technology, 32(4), 30-32.
[5] Cai, C., Wu, K. S., Lian, D., & Yuan, X. H. (2015). Study of rock-breaking mechanism under single-tooth impact. Rock and Soil Mechanics, 36(6), 1659-1666.
[6] Nawafleh, M. A., Al-Kloub, N., Tarawneh, M., & Younes, R. M. (2010). Reduction of vibration of industrial equipments. Jordan Journal of Mechanical and Industrial Engineering, 4(4), 495-502.
[7] Chen, J. S., & Zhai, Y. H. (2001). Theoretical evaluation of an impulsive-load generate. China Petroleum Machinery, 29(4), 16-18.
[8] Wiercigroch, M., & Wojewoda, J. (2008). Vibrational energy transfer via modulated impacts for percussive drilling. Journal of Theoretical and Applied Mechanics, 46(3), 715-726.
[9] Zhao, F. J., Wang, H. Y., Peng, Y., & Wang, G. J. (2001). Experimental research on acoustic emission energy and rock crushing effect under static-dynamic coupling loading. Chinese Journal of Rock Mechanics and Engineering, 31(7), 1363-1368.
DOI: http://dx.doi.org/10.3968/8293
Refbacks
- There are currently no refbacks.
Copyright (c) 2016 Advances in Petroleum Exploration and Development
This work is licensed under a Creative Commons Attribution 4.0 International License.
Share us to: 
Reminder
We are currently accepting submissions via email only.
The registration and online submission functions have been disabled.
Please send your manuscripts to aped@cscanada.net，or aped@cscanada.org for consideration. We look forward to receiving your work.
We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org
Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY).
ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office
Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.
Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net; office@cscanada.org
Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures 
