Analysis of Factors Affecting the String Cross-Through Capability Within Long Horizontal Section in Shale Gas Drilling

Wei WANG, Zhichuan GUAN, Jianjun GUO, Yuqiang XU, Yuling DOU, Xiaohui WANG

Abstract


Along with the further petroleum exploration and development, the conventional oil and gas resources cannot meet the needs of rapid economic development now. Shale gas energy as an important supplement to the existing traditional energy is one of the main successive energy in the future which has very important significance for our country to realize diversified energy security strategy. In the course of drilling and developing horizontal wells in shale gas reservoirs, when it comes to hole trajectory control technology based on guide screw drill in horizontal well drilling with long horizontal section, there are some problems that string extension ability will be limited through horizontal section and low drilling efficiency will happen in later period which is not good for economic and efficient development of shale gas. This article focused on the researches of limit mechanism of the influence factors such as assembly, drill string buckling, weight on bit, well depth profile, and slope, and finally the extension ability in horizontal section was effectively improved by optimizing the well bore profile design and optimizing drilling parameters.


Keywords


Drill strings; Horizontal well; Long horizontal section; Shale gas reservoir; Build-up rate

Full Text:

PDF

References


[1] Chen, T. G., & Guan, Z. C. (2000). Drilling engineering theory and technology (pp.166-211). Dongying, China: Petroleum University Publishing House.

[2] Guo, X. L., & Wang, Z. M. (2009). The study of the hydraulic extension of mega-extended-reach wells in Liuhua in the south China sea. Oil Drilling and Production Technology, 31(1), 10-13.

[3] Kui, Q. L., & Wang, H. Y. (2008). The study of the prediction of the critical extension distance of large-extended-reach wells. West-China Exploration Engineering, 20(7), 73-76.

[4] Yan, T., Zhang, F. M., & Liu, W. K. (2010). The study of the extension distance capacity of large-extended-reach wells. Drilling and Production Technology, 33(1), 4-7.

[5] Li, Q. M. (2012). The prediction of the critical extension distance and analysis of the drill pipe buckling of large-extended-reach wells (Doctoral dissertation). Northeast Petroleum University, China.

[6] Gao, B. K., & Gao, D. L. (1997). Numerical calculation of helical buckling of tubing string along the horizontal section. Drilling and Production Technology, (5), 13-14.

[7] Gao, G. H., Li, Q., & Li, S. F. (1996). Pipe string buckling analysis in the eyes of the horizontal well. Acta Petrolei Sinica, 3.

[8] Han, Z. Y. (1989). Directional well design and calculation. Beijing: Petroleum Industry Publishing House.

[9] Liu, X. S. (2006). Wellbore trajectory geometry. Beijing: Petroleum Industry Publishing House.

[10] Jiang, S. Z., & Feng, E. M. (2002). 3D horizontal wellbore trajectory design optimal control model and algorithm. Advances in Systems Science and Applications, 42(3), 261-264.

[11] Han, Z. Y. (1993). Wellbore inside the drill string friction of three and two dimensional model. Journal of Petroleum University (Natural Science Edition), 17, 44-49.

[12] Chen, Z., & Cao, H. J. (1998). Deflecting section of horizontal wellbore trajectory design application. Gas Industry, 12(7), 7-11.

[13] Xu, Y., Guan, Z., & Liu, Y. (2014). Structural optimization of downhole float valve via computational fluid dynamics. Engineering Failure Analysis, 44, 85-94.

[14] Xu, Y., Guan, Z., & Su, K. (2014). Methods of setting depth range with credibility of conductor for deepwater drilling based on probability statistics. Applied Ocean Research, 48, 301-307.




DOI: http://dx.doi.org/10.3968/8184

Refbacks

  • There are currently no refbacks.


Copyright (c) 2016 Advances in Petroleum Exploration and Development



Share us to:   

Reminder

 We are currently accepting submissions via email only.

The registration and online submission functions have been disabled.

Please send your manuscripts to aped@cscanada.net，or  aped@cscanada.org  for consideration. We look forward to receiving your work.

 

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY). 

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net;  office@cscanada.org

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures