The Impact of Casing Damage Critical Condition on Marker Bed With Differential Internal and External Pressure in Daqing Oilfield

Chaoyang HU, Jian GAO, Yazhen LIU

Abstract


During long-term development of Daqing oilfield of marker bed has been affected sliding between layers, causing a large area of casing damage. The marker bed casing damage mechanism has been basically clear at present, but the influencing factors of casing damage are not yet consummate. There is fluid impact of pressure on the casing on the marker bed, and fluid pressure on the critical conditions of casing damage has not yet been carried out in research. To research the critical conditions, taking into account the mechanics characteristics of the formation and elastic-plastic the finite element model has been established, and different sets of pressure differential as critical condition impact on casing damage were studied in this paper. The results showed that the internal and external casing liquid pressure difference has little effect on the formation of critical slippage. High internal casing pressure wells, with small casing damage critical slippage, are more likely to damage.


Keywords


Daqing oilfield; Casing damage; Marker bed; Finite element; Internal and external casing pressure differential

Full Text:

PDF

References


[1] Ai, C. (2003). Mechanism and theoretic models of casing failure and numerical calculation with them (Doctoral dissertation). Daqing Petroleum Institute, Daqing, China.

[2] Liu, H., Liu, J. D., & Zhuo, S. G. (2006). Geological factors for controlling damage of batch casing in the member Ⅱ of Nenjiang formation in Daqing oilfield. Acta. Petrolei. Sinica., 27(5), 135-138.

[3] Wang, F., Wu, Z. H., & Li, B. X. (2005). Study on the casing damage in western Bei2 area of Saertu oilfield. Petroleum Geology & Oilfield Development in Daqing, 24(1), 74-79.

[4] Sun, M. X., Cheng, Y. F., & Jia, J. H. (2012). Casing failure mechanism and numerical calculation for low permeability and complex fault block reservoirs. Fault Block Oil & Gas Field, 6, 788-791.

[5] Jin, C. Y., Ai, C., & Yu, H. J. (2011). Study on collapsing strength caused by easing deformation. Petroleum Geology and Recovery Efficiency, 18(5), 104-107.

[6] Li, L. Q., Kang, H. Q., & Jiang, G. P. (2007). New knowledge of casing damage genetic mechanism and integrated control technique. Petroleum Geology & Oilfield Development in Daqing, 1, 83-87.




DOI: http://dx.doi.org/10.3968/7977

Refbacks

  • There are currently no refbacks.


Copyright (c) 2016 Advances in Petroleum Exploration and Development




Share us to:   


Reminder

 We are currently accepting submissions via email only.

The registration and online submission functions have been disabled.

Please send your manuscripts to aped@cscanada.net,or  aped@cscanada.org  for consideration. We look forward to receiving your work.

 

We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org

 Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY)

ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office

Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.

Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net;  office@cscanada.org

Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures