The Application of Fuzzy Clustering Method in the Division of Reservoir Flow Unit
Abstract
The reservoir of Beierxi-Puyizu in Sabei developed area comes into the special high water-cut stage. The distribution of residual oil at the later stage of polymer flooding is disperse quietly. The contradiction in layer or among layers is complex, the range of measure reduces gradually and routine measure takes effect poorly. According to the parameters such as permeability and formation capacity, the six sedimentary units of the block are divided into four flow units, the result will provides a more credible geological reference for the identification of single runway in complex channel sand and the adjustment of measures at the later stage of polymer flooding. The microfacies of the adjacent flow units are different, they are generally flow unit of margin facies belt. At the same time, the saturation of residual oil at the juncture of different microfacies belt is high. There is little residual oil exists in the channel sand flow unit of good type and more exists in very good type, it is the target of residual oil tapping at the middle and later stage of polymer flooding. The residual saturation of the flow unit in intermediate belt is high, but there are so many difficulties in tapping the residual oil.
Keywords
References
[1] Al-Jawad, S. N., Saleh, A. H., Al-Dabaj, A. A. A., & Al-Rawi, Y. T. (2014). Reservoir flow unit identification of the mishrif formation in north rumaila field. Arabian Journal of Geosciences, 7(7), 2711-2728.
[2] Mode, A. W., Anyiam, O. A., & Onwuchekwa, C. N. (2014). Flow unit characterization: Key to delineating reservoir performance in “Aqua-field”, Niger delta, Nigeria. Journal of the Geological Society of India, 84(6), 701-708.
[3] Amaftile, J. O., Altunbay, M., Tiab, D., Kersey, D. G., & Keelan, D. K. (1993, October). Enhanced reservoir description: Using core and log data to identify hydraulic (hydraulic) units and predict permeability in uncored intervals/wells. Paper presented at SPE Annual Technical Conference and Exhibition, Houston, Texas.
[4] Ti, G. M., Inteq, B. H., & Ogbe, D. O. (1995). Use of flow units as a tool for reservoir description: A case study. SPE Formation Evaluation, 10(2), 122-128.
[5] Poupon, A., & Levaux, J. (1971, May). Evaluation of water saturation in shaly formations. Paper presented at SPWLA 12th Annual Logging Symposium, Dallas, Texas.
[6] Hearn, C. L., Hobson, J. P., & Fowler, M. L. (1986). Reservoir characterization for simulation, Hartzog Draw field, Wyoming. USA: Academic Press.
DOI: http://dx.doi.org/10.3968/7604
Refbacks
- There are currently no refbacks.
Copyright (c) 2015 Advances in Petroleum Exploration and Development
Reminder
We are currently accepting submissions via email only.
The registration and online submission functions have been disabled.
Please send your manuscripts to aped@cscanada.net,or aped@cscanada.org for consideration. We look forward to receiving your work.
We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org
Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY).
ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office
Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.
Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net; office@cscanada.org
Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures