Investigation of the Factors Influencing Volume Fracturing of Tight Reservoir by Using Numerical Simulation
Abstract
Based on finite element method, a complex fracture model of volume fracturing has been established for tight oil in this paper, which achieves the actual description of complex fractures. For water injection conditions, the volume of fractures network after fractured which considered the influence of fracture segment was analyzed by using numerical simulation. By comparing and analyzing the simulation results, the most optimal fracture segment is 10. The research results provide a theoretical basis for the optimized design of volume fracturing in tight oil.
Key words: Tight oil; Volume fracturing; Numerical simulation; Finite element method
Keywords
Full Text:
PDFReferences
[1] Wang, H., & Wang, Q. (2012). Volume fracturing in the development and application of ultra-low permeability reservoirs. China Petroleum and Chemical Standards and Quality, (2), 143.
[2] Wang, W., Zhao, G., & Su, Y. (2013). Dense reservoir volume fracturing technology. Xinjiang Petroleum Geology, 32(3), 345-348.
[3] Liu, Z., Zheng, X., & Zhang, Y. (2006). Security can be based on dynamic analysis of fractured wells producing artificial finite element method. Daqing Petroleum Institute, 30(2), 30-34.
[4] Cai, T. (2013). Volume numerical simulation of low permeability reservoir fracturing research (Doctoral dissertation). Northeast Petroleum University, Daqing, China.
[5] Li, Y., Wei, C., Qin, G., Li, M., & Luo, K. (2013, March). Numerical simulation of hydraulically induced fracture network propagation in shale formation. Paper presented at International Petroleum Technology Conference, Beijing, China.
[6] Spencer, R. J., Pedersen, P. K., & Clarkson, C. R. (2011). Shale gas: Part 5–shale gas vs. tight gas vs. conventional gas. Canadian Society of Petroleum Geologists Reservoir Magazine, (1), 25-30.
[7] Rahmanian, M., Solano, N., & Aguilera, R. (2010, May). Storage and output flow from shale and tight gas reservoirs. Paper presented at the SPE Western Regional Meeting, Anaheim, California, USA.
DOI: http://dx.doi.org/10.3968/6918
Refbacks
- There are currently no refbacks.
Copyright (c)
Reminder
We are currently accepting submissions via email only.
The registration and online submission functions have been disabled.
Please send your manuscripts to aped@cscanada.net,or aped@cscanada.org for consideration. We look forward to receiving your work.
We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org
Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY).
ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office
Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.
Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net; office@cscanada.org
Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures