Mechanical Analysis of Drill String Drag and Torque With the Condition of Irregular Borehole
Abstract
With the rapid development of drilling technology, air drilling technology and large displacement well, and horizontal well drilling technology are also known as the main directions of the future drilling development. Compared with conventional drilling mode, air drilling is particular, such as drilling fluid with low density, poor lubrication, large friction coefficient between the drill string and borehole, irregular borehole, well trajectory control difficulty, and so on. Along with the change of drilling condition, the stress of drill string is also changed. However, irregular borehole has a direct impact on the fatigue failure and the stress of drill string. Therefore, it is necessary to analyze drill string stress and influence factors in irregular hole. Based on the previous studies, application of drill string mechanics and statistical regression methods is used to study drill string drag and torque, and it can predict the drilling string stress state with the hole enlargement rate, meanwhile, it also provides a theoretical basis for gas drilling and complex drilling
technology.
Keywords
Full Text:
PDFReferences
Guo, Y. F., & Bai, Y. C. (2001). The research status and prospect of drag at home and abroad. Foreign Oilfield Engineering, 17(8), 31-33.
Zhou, Y. C., & Zhai, H. J. (2003). Underbalanced drilling technology and application. Beijing: Petroleum Industry Press.
Tang, B. (2001). Gas drilling string friction research and application. Southwest Petroleum Institute Dissertation.
Menand, S., Sellami, H., & Bouguecha, A., et al. (n.d.). Axial force transfer of buckled drill pipe in deviated wells. SPE119861.
Johansick, C. A. (1984). Torque and drag in direction wells prediction and measurement. Journal of Petroleum Technology, 36(6), 987-992.
Lubinski, A., & Woods, H. B. (1953). Factors affecting the angle of inclination and dog-legging in rotary Bore Holes. Drilling and Production Practice, 222-250.
Li, Z. F., & Liu, X. S. (1992). Horizontal well drilling string steady state tension-torque model and its application. Petroleum Drilling Techniques, 20(4), 1-6.
Yan, T., Zhang, J. Q., & Sun, X. Z., et al. (1995). Analysis of drillstring frictional drag in horizontal wells of Daqing. Journal of Daqing Petroleum Institute, 19(2), 1-5.
An, H., Scott, S. L., & Langlinais, J. P. (2000). Estimation bottom hole pressure in pumping oil wells: Effect of high viscosity fluids and casinghead pressure. Dallas: SPE Annual Technical Conference and Exhibition.
Li, Z. F. (2008). Tubular mechanics in oil-gas wells and its applications. Beijing: Petroleum Industry Press.
Lin, T. J., Lian, Z. H., & Zhang, J. L. (2011). Comparative study on dynamics behaviors of the full drilstring between gas drilling and mud. Journal of Southwest Petroleum Universty (Science & Technology Edition), 33(1), 139-142.
DOI: http://dx.doi.org/10.3968/10177
Refbacks
- There are currently no refbacks.
Copyright (c) 2018 peng wang
This work is licensed under a Creative Commons Attribution 4.0 International License.
Share us to: 
Reminder
We are currently accepting submissions via email only.
The registration and online submission functions have been disabled.
Please send your manuscripts to aped@cscanada.net，or aped@cscanada.org for consideration. We look forward to receiving your work.
We only use three mailboxes as follows to deal with issues about paper acceptance, payment and submission of electronic versions of our journals to databases:
caooc@hotmail.com; aped@cscanada.net; aped@cscanada.org
Articles published in Advances in Petroleum Exploration and Development are licensed under Creative Commons Attribution 4.0 (CC-BY).
ADVANCES IN PETROLEUM EXPLORATION AND DEVELOPMENT Editorial Office
Address:1055 Rue Lucien-L'Allier, Unit #772, Montreal, QC H3G 3C4, Canada.
Telephone: 1-514-558 6138
Website: Http://www.cscanada.net
Http://www.cscanada.org
E-mail:office@cscanada.net; office@cscanada.org
Copyright © 2010 Canadian Research & Development Centre of Sciences and Cultures 
